Hand from the Road Machine 

 Hand from the Road Machine - hand across the top - a hydraulic machine from the Road, scope: from road machine, hand destroyed the top hand-lift system tool that can serve in a variety of projects and the collapse of lifting the top down l effect. To improve efficiency, reduce labor intensity and play a good role. The product design is reasonable, simple, flexible and reliable, widely used in factories, warehouses, docks, railways, construction and other origin of the stack, particularly for mobile installation of various machinery and equipment, motorcycle maintenance, heavy lifting and so on. Second, use: 1, to collapse under the weight given the focus of the placement of choice, when the crane overturned Buzhi Yu; 2, lifting and landing board or destroyed must be destroyed all the area with heavy foot contact to ensure there is sufficient strength to prevent heavy fall; 3, place the top of the ground should be firm collapse, such as the ground is soft, adding pads under the base should be, destroyed the top center position on the pads; 4, in use before Air shake once, from low to high, check for stuck or anomalies, everything is normal to use. Third, pay attention: 1, must be aware of before using the weight of heavy objects, the use of machines from the road, overload is strictly prohibited, so as to avoid equipment damage accident; 2, if the weight exceeds rated capacity, destroyed more than required top simultaneously, maintaining the top of the load even more than destroyed, the same increase in the rate of decline, stable; 3, weight lifting, if not uninstalled in a short time, you must fill in the following weight and weight plus height of equal to the auxiliary pad as support. Fourth, works from the Road Machine (hand destroyed the top) is the hand force through the gears to drive the shell lifting or falling. Unloading heavy or falls in the left crank to move the pawl to reverse rotation, manually control the speed. From the Road Machine (KD series of hand destroyed jack) Technical parameter Item / Specification / Model KD3-5 KD7-10 rated for a maximum top weight (T) 5 10 most destroyed rated weight (T) 3 7 maximum lifting height (MM) 200 250 feet destroyed lowest position (MM) 60 70 destroyed the top of the highest position (MM) 260 320 roof lowest position (MM) 520 630 roof top location (MM) 720 880 Weight (KG) (approximate) 18.5 30 
 Main: symmetric single turnout turnout turnout turnout crossover crossing the line turnout Road splint splint fish plate rail mechanism spike spike spike spike hand drill Hand drill two-man pull curved track the level of hydraulic bending rail curved track control device Hydraulic rack from the Road from the Road, turn spiral hydraulic turbine rope pulling device pulling off multiple sub-Rama machine tub rail track rehabilitation machine crushing hole machine 
 Contact: Li Ying 
 Mobile: 
 Phone: 
 Fax: 
 QQ: 41 Want: guolong02 
 Your satisfaction is our service aim 
 We have been working, please call to discuss!!!